443 lines
22 KiB
C
443 lines
22 KiB
C
#include "driver/gpio.h"
|
|
#include "unity.h"
|
|
#include "unity_test_utils.h"
|
|
#include "relay_chn.h" // Main header file for the relay_chn component
|
|
#include <esp_log.h>
|
|
#include <freertos/FreeRTOS.h>
|
|
#include <freertos/task.h>
|
|
#include "sdkconfig.h" // For accessing CONFIG_* values
|
|
|
|
// Test GPIOs and channel IDs
|
|
// Please ensure these GPIOs are correct and suitable for your board.
|
|
// Two channels (4 GPIOs) are used as an example.
|
|
const gpio_num_t gpio_map[] = {GPIO_NUM_4, GPIO_NUM_5, GPIO_NUM_18, GPIO_NUM_19};
|
|
const uint8_t gpio_count = sizeof(gpio_map) / sizeof(gpio_map[0]);
|
|
// Assuming 2 GPIOs are used per channel
|
|
const uint8_t relay_chn_count = gpio_count / 2;
|
|
|
|
// Retrieve inertia value from SDKconfig
|
|
#ifndef CONFIG_RELAY_CHN_OPPOSITE_INERTIA_MS
|
|
#define CONFIG_RELAY_CHN_OPPOSITE_INERTIA_MS 500 // Default if not defined in SDKconfig
|
|
#endif
|
|
|
|
const uint32_t opposite_inertia_ms = CONFIG_RELAY_CHN_OPPOSITE_INERTIA_MS;
|
|
|
|
// Tolerant delay margin to ensure operations complete, especially after inertia.
|
|
const uint32_t test_delay_margin_ms = 50;
|
|
|
|
// --- Test Setup/Teardown Functions ---
|
|
void setUp(void) {
|
|
ESP_LOGI("TEST_SETUP", "Running setUp for relay_chn tests.");
|
|
// Re-create the component before each test. relay_chn_create returns esp_err_t.
|
|
TEST_ESP_OK(relay_chn_create(gpio_map, gpio_count));
|
|
// Ensure all relays are stopped at the beginning, and transition to FREE state
|
|
for (uint8_t i = 0; i < relay_chn_count; i++) {
|
|
relay_chn_stop(i); // relay_chn_stop returns void
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms)); // Wait for FREE state
|
|
}
|
|
ESP_LOGI("TEST_SETUP", "All channels initialized to RELAY_CHN_STATE_FREE.");
|
|
}
|
|
|
|
void tearDown(void) {
|
|
ESP_LOGI("TEST_TEARDOWN", "Running tearDown for relay_chn tests.");
|
|
// Stop all relays after each test, and transition to FREE state
|
|
for (uint8_t i = 0; i < relay_chn_count; i++) {
|
|
relay_chn_stop(i); // relay_chn_stop returns void
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms)); // Wait for FREE state
|
|
}
|
|
ESP_LOGI("TEST_TEARDOWN", "All channels returned to RELAY_CHN_STATE_FREE.");
|
|
}
|
|
|
|
// --- Basic Functionality Tests ---
|
|
|
|
// TEST_CASE 1: Test that relay channels initialize correctly to RELAY_CHN_STATE_FREE
|
|
TEST_CASE("Relay channels initialize correctly to FREE state", "[relay_chn]") {
|
|
ESP_LOGI("TEST", "Running test: Relay channels initialize correctly to FREE state");
|
|
for (uint8_t i = 0; i < relay_chn_count; i++) {
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(i));
|
|
}
|
|
}
|
|
|
|
// TEST_CASE 2: Test that relays run in the forward direction and update their state
|
|
TEST_CASE("Relay channels run forward and update state", "[relay_chn]") {
|
|
ESP_LOGI("TEST", "Running test: Relay channels run forward and update state");
|
|
for (uint8_t i = 0; i < relay_chn_count; i++) {
|
|
relay_chn_run_forward(i); // relay_chn_run_forward returns void
|
|
// Short delay for state to update
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(i));
|
|
}
|
|
}
|
|
|
|
// TEST_CASE 3: Test that relays run in the reverse direction and update their state
|
|
TEST_CASE("Relay channels run reverse and update state", "[relay_chn]") {
|
|
ESP_LOGI("TEST", "Running test: Relay channels run reverse and update state");
|
|
for (uint8_t i = 0; i < relay_chn_count; i++) {
|
|
relay_chn_run_reverse(i); // relay_chn_run_reverse returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(i));
|
|
}
|
|
}
|
|
|
|
// TEST_CASE 4: Test that relays stop and transition to RELAY_CHN_STATE_FREE
|
|
// This test also verifies the transition to FREE state after a STOP command.
|
|
TEST_CASE("Relay channels stop and update to FREE state", "[relay_chn]") {
|
|
ESP_LOGI("TEST", "Running test: Relay channels stop and update to FREE state");
|
|
for (uint8_t i = 0; i < relay_chn_count; i++) {
|
|
// First, run forward to test stopping and transitioning to FREE state
|
|
relay_chn_run_forward(i); // relay_chn_run_forward returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(i));
|
|
|
|
// Now, issue the stop command
|
|
relay_chn_stop(i); // relay_chn_stop returns void
|
|
// Immediately after stop, state should be STOPPED
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_STOPPED, relay_chn_get_state(i));
|
|
|
|
// Then, wait for the inertia period for it to transition to RELAY_CHN_STATE_FREE
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(i));
|
|
}
|
|
}
|
|
|
|
// TEST_CASE 5: Test function calls with invalid channel IDs
|
|
// TEST_CASE("Invalid channel ID handling", "[relay_chn]") {
|
|
// ESP_LOGI("TEST", "Running test: Invalid channel ID handling");
|
|
// uint8_t invalid_channel_id = relay_chn_count + 1; // An ID that is out of bounds
|
|
|
|
// // These calls are expected to return ESP_ERR_INVALID_ARG, so TEST_ASSERT_EQUAL is appropriate.
|
|
// TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, relay_chn_run_forward(invalid_channel_id));
|
|
// TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, relay_chn_run_reverse(invalid_channel_id));
|
|
// TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, relay_chn_stop(invalid_channel_id));
|
|
|
|
// // Test tilt commands only if tilt functionality is enabled
|
|
// #if CONFIG_RELAY_CHN_ENABLE_TILTING == 1
|
|
// TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, relay_chn_tilt_forward(invalid_channel_id));
|
|
// TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, relay_chn_tilt_reverse(invalid_channel_id));
|
|
// #endif
|
|
|
|
// TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, relay_chn_get_state(invalid_channel_id));
|
|
// }
|
|
|
|
// TEST_CASE 6: Test independent operation of multiple relay channels
|
|
TEST_CASE("Multiple channels can operate independently", "[relay_chn]") {
|
|
ESP_LOGI("TEST", "Running test: Multiple channels can operate independently");
|
|
if (relay_chn_count >= 2) {
|
|
// Start Channel 0 in forward direction
|
|
relay_chn_run_forward(0); // relay_chn_run_forward returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(0));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(1)); // Other channel should not be affected
|
|
|
|
// Start Channel 1 in reverse direction
|
|
relay_chn_run_reverse(1); // relay_chn_run_reverse returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(0));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(1));
|
|
|
|
// Stop Channel 0 and wait for it to become FREE
|
|
relay_chn_stop(0); // relay_chn_stop returns void
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(0));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(1)); // Other channel should continue running
|
|
|
|
// Stop Channel 1 and wait for it to become FREE
|
|
relay_chn_stop(1); // relay_chn_stop returns void
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(0));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(1));
|
|
} else {
|
|
ESP_LOGW("TEST", "Skipping 'Multiple channels can operate independently' test: Not enough channels available.");
|
|
}
|
|
}
|
|
|
|
|
|
// ### Inertia and State Transition Tests
|
|
|
|
// This section specifically targets the inertia periods and complex state transitions as per the component's logic.
|
|
|
|
// TEST_CASE 7: Test transition from forward to reverse with inertia and state checks
|
|
// Scenario: RELAY_CHN_STATE_FORWARD -> (relay_chn_run_reverse) -> RELAY_CHN_STATE_STOPPED -> (inertia) -> RELAY_CHN_STATE_REVERSE
|
|
TEST_CASE("Forward to Reverse transition with opposite inertia", "[relay_chn][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Forward to Reverse transition with opposite inertia");
|
|
uint8_t ch = 0; // Channel to test
|
|
|
|
// 1. Start in forward direction
|
|
relay_chn_run_forward(ch); // relay_chn_run_forward returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms)); // Short delay for state stabilization
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue reverse command
|
|
relay_chn_run_reverse(ch); // relay_chn_run_reverse returns void
|
|
// Immediately after the command, the motor should be stopped
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE_PENDING, relay_chn_get_state(ch));
|
|
|
|
// Wait for the inertia period (after which the reverse command will be dispatched)
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(ch)); // Should now be in reverse state
|
|
}
|
|
|
|
// TEST_CASE 8: Test transition from reverse to forward with inertia and state checks
|
|
// Scenario: RELAY_CHN_STATE_REVERSE -> (relay_chn_run_forward) -> RELAY_CHN_STATE_STOPPED -> (inertia) -> RELAY_CHN_STATE_FORWARD
|
|
TEST_CASE("Reverse to Forward transition with opposite inertia", "[relay_chn][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Reverse to Forward transition with opposite inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// 1. Start in reverse direction
|
|
relay_chn_run_reverse(ch); // relay_chn_run_reverse returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue forward command
|
|
relay_chn_run_forward(ch); // relay_chn_run_forward returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD_PENDING, relay_chn_get_state(ch));
|
|
|
|
// Wait for inertia
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 9: Test issuing the same run command while already running (no inertia expected)
|
|
// Scenario: RELAY_CHN_STATE_FORWARD -> (relay_chn_run_forward) -> RELAY_CHN_STATE_FORWARD
|
|
TEST_CASE("Running in same direction does not incur inertia", "[relay_chn][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Running in same direction does not incur inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// 1. Start in forward direction
|
|
relay_chn_run_forward(ch); // relay_chn_run_forward returns void
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue the same forward command again
|
|
relay_chn_run_forward(ch); // relay_chn_run_forward returns void
|
|
// As per the code, is_direction_opposite_to_current_motion should return false, so no inertia.
|
|
// Just a short delay to check state remains the same.
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 10: Test transition from FREE state to running (no inertia expected)
|
|
// Scenario: RELAY_CHN_STATE_FREE -> (relay_chn_run_forward) -> RELAY_CHN_STATE_FORWARD
|
|
TEST_CASE("FREE to Running transition without inertia", "[relay_chn][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: FREE to Running transition without inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// setUp() should have already brought the channel to FREE state
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(ch));
|
|
|
|
// Start in forward direction
|
|
relay_chn_run_forward(ch); // relay_chn_run_forward returns void
|
|
// No inertia is expected when starting from FREE state.
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(ch));
|
|
}
|
|
|
|
|
|
// ### Tilt Functionality Tests (Conditional)
|
|
|
|
// This section will only be compiled if **`CONFIG_RELAY_CHN_ENABLE_TILTING`** is defined as **`1`** in `sdkconfig`.
|
|
|
|
#if CONFIG_RELAY_CHN_ENABLE_TILTING == 1
|
|
|
|
#define RELAY_CHN_CMD_FORWARD 1
|
|
#define RELAY_CHN_CMD_REVERSE 2
|
|
|
|
// Helper function to prepare channel for tilt tests
|
|
void prepare_channel_for_tilt(uint8_t chn_id, int initial_cmd) {
|
|
// Ensure the channel has had a 'last_run_cmd'
|
|
if (initial_cmd == RELAY_CHN_CMD_FORWARD) {
|
|
relay_chn_run_forward(chn_id);
|
|
} else { // Assuming initial_cmd is RELAY_CHN_CMD_REVERSE
|
|
relay_chn_run_reverse(chn_id);
|
|
}
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms)); // Allow command to process
|
|
relay_chn_stop(chn_id); // Stop it to set last_run_cmd but return to FREE for next test
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(chn_id));
|
|
}
|
|
|
|
// TEST_CASE 11: Test transition from running forward to tilt forward
|
|
// Scenario: RELAY_CHN_STATE_FORWARD -> (relay_chn_tilt_forward) -> RELAY_CHN_STATE_STOPPED -> (inertia) -> RELAY_CHN_STATE_TILT_FORWARD
|
|
TEST_CASE("Run Forward to Tilt Forward transition with inertia", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Run Forward to Tilt Forward transition with inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running forward first to set last_run_cmd
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_FORWARD);
|
|
|
|
// 1. Start in forward direction
|
|
relay_chn_run_forward(ch);
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue tilt forward command
|
|
relay_chn_tilt_forward(ch);
|
|
// After tilt command, it should immediately stop and then trigger inertia.
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_STOPPED, relay_chn_get_state(ch));
|
|
|
|
// Wait for the inertia period (after which the tilt command will be dispatched)
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_FORWARD, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 12: Test transition from running reverse to tilt reverse
|
|
// Scenario: RELAY_CHN_STATE_REVERSE -> (relay_chn_tilt_reverse) -> RELAY_CHN_STATE_STOPPED -> (inertia) -> RELAY_CHN_STATE_TILT_REVERSE
|
|
TEST_CASE("Run Reverse to Tilt Reverse transition with inertia", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Run Reverse to Tilt Reverse transition with inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running reverse first to set last_run_cmd
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_REVERSE);
|
|
|
|
// 1. Start in reverse direction
|
|
relay_chn_run_reverse(ch);
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue tilt reverse command
|
|
relay_chn_tilt_reverse(ch);
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_STOPPED, relay_chn_get_state(ch));
|
|
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_REVERSE, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 13: Test transition from FREE state to tilt forward (now with preparation)
|
|
// Scenario: RELAY_CHN_STATE_FREE -> (prepare) -> RELAY_CHN_STATE_FREE -> (relay_chn_tilt_forward) -> RELAY_CHN_STATE_STOPPED -> (inertia) -> RELAY_CHN_STATE_TILT_FORWARD
|
|
TEST_CASE("FREE to Tilt Forward transition with inertia (prepared)", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: FREE to Tilt Forward transition with inertia (prepared)");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running forward first to set last_run_cmd
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_FORWARD);
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(ch)); // Ensure we are back to FREE
|
|
|
|
// Issue tilt forward command
|
|
relay_chn_tilt_forward(ch);
|
|
// From FREE state, tilt command should still incur the inertia due to the internal timer logic
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_FORWARD, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 14: Test transition from FREE state to tilt reverse (now with preparation)
|
|
// Scenario: RELAY_CHN_STATE_FREE -> (prepare) -> RELAY_CHN_STATE_FREE -> (relay_chn_tilt_reverse) -> RELAY_CHN_STATE_STOPPED -> (inertia) -> RELAY_CHN_STATE_TILT_REVERSE
|
|
TEST_CASE("FREE to Tilt Reverse transition with inertia (prepared)", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: FREE to Tilt Reverse transition with inertia (prepared)");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running reverse first to set last_run_cmd
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_REVERSE);
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(ch)); // Ensure we are back to FREE
|
|
|
|
// Issue tilt reverse command
|
|
relay_chn_tilt_reverse(ch);
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_REVERSE, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 15: Test transition from tilt forward to run forward (inertia expected for run)
|
|
// Scenario: RELAY_CHN_STATE_TILT_FORWARD -> (relay_chn_run_forward) -> RELAY_CHN_STATE_FORWARD
|
|
TEST_CASE("Tilt Forward to Run Forward transition with inertia", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Tilt Forward to Run Forward transition with inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running forward first to set last_run_cmd, then tilt
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_FORWARD);
|
|
relay_chn_tilt_forward(ch); // Go to tilt state
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_FORWARD, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue run forward command
|
|
relay_chn_run_forward(ch);
|
|
// From Tilt to Run in the same logical name but in the opposite direction, inertia is expected.
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD_PENDING, relay_chn_get_state(ch));
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FORWARD, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 16: Test transition from tilt reverse to run reverse (no inertia expected for run)
|
|
// Scenario: RELAY_CHN_STATE_TILT_REVERSE -> (relay_chn_run_reverse) -> RELAY_CHN_STATE_REVERSE
|
|
TEST_CASE("Tilt Reverse to Run Reverse transition with inertia", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Tilt Reverse to Run Reverse transition with inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running reverse first to set last_run_cmd, then tilt
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_REVERSE);
|
|
relay_chn_tilt_reverse(ch); // Go to tilt state
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_REVERSE, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue run reverse command
|
|
relay_chn_run_reverse(ch);
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE_PENDING, relay_chn_get_state(ch));
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 17: Test transition from tilt forward to run reverse (without inertia)
|
|
// Scenario: RELAY_CHN_STATE_TILT_FORWARD -> (relay_chn_run_reverse) -> RELAY_CHN_STATE_REVERSE
|
|
TEST_CASE("Tilt Forward to Run Reverse transition without inertia", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Tilt Forward to Run Reverse transition without inertia");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running forward first to set last_run_cmd, then tilt
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_FORWARD);
|
|
relay_chn_tilt_forward(ch); // Go to tilt state
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_FORWARD, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue run reverse command (opposite direction)
|
|
relay_chn_run_reverse(ch);
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_REVERSE, relay_chn_get_state(ch));
|
|
}
|
|
|
|
// TEST_CASE 18: Test stopping from a tilt state (no inertia for stop command itself)
|
|
// Scenario: RELAY_CHN_STATE_TILT_FORWARD -> (relay_chn_stop) -> RELAY_CHN_STATE_STOPPED -> (inertia) -> RELAY_CHN_STATE_FREE
|
|
TEST_CASE("Tilt to Stop transition without immediate inertia for stop", "[relay_chn][tilt][inertia]") {
|
|
ESP_LOGI("TEST", "Running test: Tilt to Stop transition without immediate inertia for stop");
|
|
uint8_t ch = 0;
|
|
|
|
// Prepare channel by running forward first to set last_run_cmd, then tilt
|
|
prepare_channel_for_tilt(ch, RELAY_CHN_CMD_FORWARD);
|
|
relay_chn_tilt_forward(ch); // Go to tilt state
|
|
vTaskDelay(pdMS_TO_TICKS(opposite_inertia_ms + test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_TILT_FORWARD, relay_chn_get_state(ch));
|
|
|
|
// 2. Issue stop command
|
|
relay_chn_stop(ch);
|
|
// Stop command should apply immediately, setting state to FREE since last state was tilt.
|
|
vTaskDelay(pdMS_TO_TICKS(test_delay_margin_ms));
|
|
TEST_ASSERT_EQUAL(RELAY_CHN_STATE_FREE, relay_chn_get_state(ch));
|
|
}
|
|
|
|
#else // CONFIG_RELAY_CHN_ENABLE_TILTING == 0
|
|
// If tilt functionality is disabled, these tests are skipped.
|
|
// A dummy test case is added to indicate this in the test output.
|
|
TEST_CASE("Tilt functionality is disabled, skipping tilt tests", "[relay_chn][tilt_disabled]") {
|
|
ESP_LOGI("TEST", "Tilt functionality is disabled (CONFIG_RELAY_CHN_ENABLE_TILTING is 0). Skipping tilt tests.");
|
|
TEST_ASSERT_TRUE(true); // Just to ensure at least one test passes for visibility
|
|
}
|
|
#endif // CONFIG_RELAY_CHN_ENABLE_TILTING
|
|
|
|
|
|
// ### `app_main` Function
|
|
|
|
// --- app_main function ---
|
|
void app_main(void) {
|
|
ESP_LOGI("APP_MAIN", "Starting relay_chn unit tests...");
|
|
|
|
// Run the Unity test runner
|
|
unity_run_all_tests();
|
|
|
|
// After tests complete, instead of restarting, the device will halt.
|
|
ESP_LOGI("APP_MAIN", "All relay_chn tests completed. Device halted.");
|
|
while (1) {
|
|
vTaskDelay(pdMS_TO_TICKS(1000)); // Wait with low power consumption
|
|
}
|
|
} |