Update Readme and add some tilting feature details.

README.md

@@ -11,17 +11,23 @@ An ESP-IDF component for controlling relay channels, specifically designed for d
 - Forward/Reverse direction control
 - Direction flipping capability
 - State monitoring and reporting
+- Optional sensitivty adjustable tilting feature
 
 ## Description
 
 Each relay channel consists of 2 output relays controlled by 2 GPIO pins. The component provides APIs to control these relay pairs while ensuring safe operation, particularly for driving bipolar motors. It prevents short-circuits by automatically managing direction changes with configurable inertia timing.
 
+It also provides an optional tilting interface per channel base. Tilting makes a channel move with a specific pattern moving with small steps at a time. Tilting is specifically designed for controlling some types of curtains that need to be adjusted to let enter specific amount of day light.  
+Since it operates on relays, the switching frequency is limited to 10Hz which complies with the most of the general purpose relays' requirements. The minimum frequency is 2Hz and the duty cycle is about 10% in all ranges.  
+The module also handles all the required timing between the movement transitions automatically to ensure reliable operation.
+
 ## Configuration
 
 Configure the component through menuconfig under "Relay Channel Driver Configuration":
 
 - `CONFIG_RELAY_CHN_OPPOSITE_INERTIA_MS`: Time to wait before changing direction (200-1500ms, default: 800ms)
 - `CONFIG_RELAY_CHN_COUNT`: Number of relay channels (1-8, default: 1)
+- `CONFIG_RELAY_CHN_ENABLE_TILTING`: Enable tilting interface on all channels. (default: n)
 
 ## Installation
 
@@ -77,6 +83,30 @@ char *state_str = relay_chn_get_state_str(0);
 relay_chn_direction_t direction = relay_chn_get_direction(0);
 ```
 
+### 4. Tilting Interface (if enabled)
+
+```c
+// Assuming CONFIG_RELAY_CHN_ENABLE_TILTING is enabled
+
+// Start tilting automatically (channel 0)
+relay_chn_tilt_auto(0);
+
+// Tilt forward (channel 0)
+relay_chn_tilt_forward(0);
+
+// Tilt reverse (channel 0)
+relay_chn_tilt_reverse(0);
+
+// Stop tilting (channel 0)
+relay_chn_tilt_stop(0);
+
+// Set tilting sensitivity (channel 0, sensitivity as percentage)
+relay_chn_tilt_sensitivity_set(0, 90);
+
+// Get tilting sensitivity (channel 0, sensitivty as percentage)
+uint8_t sensitivity = relay_chn_tilt_sensitivity_get(0);
+
+
 ## License
 
 [MIT License](LICENSE) - Copyright (c) 2025 kozmotronik.